How to Connect a Turntable to a Receiver Without a Phono Input

The recent rise in digital music saw the decline of vinyl, but a reaction against the dominance of digital media has sparked a renewed interest in vinyl. If you are looking to explore this classic medium yourself, you’ll need to learn how to add a turntable to a stereo system. For the most part, this is as simple a process as adding any other audio component to your stereo system. Steps 1 Decide on the placement of your turntable. The key consideration is that your turntable should be as level as possible; this keeps the stylus from applying uneven pressure to your records. In addition, avoid stacking your turntable directly on top of another electronic component, as this can lead to electrical interference that degrades the audio signal. Turntables produce an audio signal that is much quieter than other components like CD players, and therefore they require an extra stage of amplification.

Top 10 Best Turntable & Record Player – Reviews And Buying Guide

But does it equal them in sound? Its reasonable price will satisfy those looking for a fully automatic turntable that produces great sound. Deconstructing the Denon DP F Vintage Denon turntables tend to be either semi-automatic or automatic, and Denon have continued this trend with their new offerings. Also included is a cueing lever to allow the user to select tracks on the record, a must for any good automatic turntable.

Before I reset the speakers crossover, bass is anchored at the subwoofer location instead of the appropriate front speaker.

Turntables that need grounding feature a cable that needs to be attached to your preamp whether it’s an external preamp, mixer, amplifier. Turntables that are not grounded will produce an obvious humming sound. If you’re buying your first listening turntable setup, go with the tried and true like Shure’s M97xE. If you plan to buy a cartridge for your turntable, figure out if you need a headshell -mounted cartridge or a cartridge that directly mounts to your tonearm turntable arm.

Some cartridges, such as the Ortofon Concorde series , bypass the headshell and plug directly into a tonearm. Generally, the more expensive the cartridge the better the sound quality, power output, frequency range, and tracking how the needle rides the record groove.

5 Powered Speakers for Audio Technica AT-LP60 and AT-LP120 Turntables

When was the last time you had anything hooked up to the tape monitors? If you are like me you ditched your cassette deck years ago It would not have occurred to me to attempt to connect the Little Dot to the headphone jack of the Yamaha, but in theory that should work no differently than connecting to the headphone jack of your iPad note it would be better to access a line out signal from your iPad via some sort of docking device. Sounds like the Yamaha’s headphone circuit may be shot.

Do you hear noise and distortion if you hook up your headphones directly to the Yamaha headphone jack too? I would think it is pretty unusual for the headphone circuitry and both tape monitors to fail in the same unit. Either you are very unlucky, have grievously mistreated your poor Yamaha over the years, or are doing something wrong that is not readily apparent from my view across the interwebs most likely There should be a way to make this work if your Yamaha is in good working order.

Particularly when any turntable is usually afflicted by the actual rigors a DJ might put it through.

It seems that everybody over a certain age has a stash of them hidden away somewhere, and everybody under that certain age is trying to get their hands on that stash. Vinyl LPs have great sound quality, and they’re amazingly durable and just plain cool. Still, they have their drawbacks: Fortunately, you can solve these problems by recording your vinyl onto CDs. It can be a complicated process, but once you do it you’ll have a high-quality backup of your irreplaceable rarities.

What’s more, you’ll be able to enjoy your Cat Stevens collection on the way to work. Steps 1 Install recording and editing software on your computer. The standard sound recorder application that comes with most PCs will not enable you to record an LP to your hard drive. There are, however, a variety of programs that record audio, ranging from freeware to very expensive professional editing software. Some of these obviously work better than others, and some have more features, but in general you want a program that writes files directly to the hard drive and that enables you to do some minor editing of the recorded files.

For a more thorough discussion of recording and editing software, including reviews, visit the external links listed in the citations, Clive Backham’s page in particular. You will need to amplify and equalize the sound from your turntable in order to record it onto your computer. If your turntable has a built-in preamp, you should be able to plug it directly into your computer’s sound card. If you don’t have a built-in preamp, you can either plug the turntable into a stereo receiver and plug the receiver into your computer sound card, or you can purchase a preamp–you can get these at most computer, audio or electronics stores–and plug your turntable into that.

Setting Up the AT-LP120-USB Turntable – Part 1

But, as with most professional gear, proper setup is critical to getting the most out of the AT-LP USB and ensuring long-lasting operation of the stylus and enjoyment of your records. The first order of business is to put all the pieces in place. So set the platter and slip mat onto the turntable spindle, making sure the platter is fully seated.

Next, lock the tone arm in place in the tone arm rest and attach the headshell assembly by inserting it into the end of the tone arm.

In the early days, Numark mixers were the mixer to own, and today that same standard is being set by Numark digital DJ controllers.

Vintage Receiver Repair and Modification The amplifier in an audio system serves as the central command unit in a way, as it takes the audio from the source, amplifies it, and sends it to the speakers. A receiver, or integrated amplifier, is even more involved in its role, as it has source selectors, speaker selectors, equalizers, and often a radio receiver, as well as other functions.

For ultimate simplicity, and cost effectiveness, an integrated amp of receiver is recommended over obtaining and using the individual components. When it comes to receiver choice, there’s two main categories: Vintage is generally preferable, as long as you don’t need satellite radio, an iPod dock, wireless streaming or other superfluous features. Vintage receivers are better than modern receivers with the same features for a few reasons: They use high quality materials often all metal and wood too.

Beyond that, the sound is often thought of as being more lifelike, dynamic, or full by some. They require maintenance, but so do modern receivers. But often, modern receivers are unrepairable with surface mount components and other construction methods. Vintage receivers were usually built with the intention of being repaired when they break. A high end, restored vintage receiver will run you between an dollars usually.

Pioneer VSX-1020-K Operating Instructions For The User

No other turntable has defined DJing like the Technics It is layout, functionality, and durability are celebrated. Here are a few of its own specific strengths: Amazing appearance, iconic layout Top quality building, most parts are made of metal high torque, direct drive motor magnetically driven Receptive pitch control Lastingness: Styling may be thought of as out of vogue as well as the finish of the moulded rubber foundation is slightly rough in one little spot, possibly because of the distinct properties of rubber compared to plastics.

It is silent backdrops rate equilibrium and ease of operation more than compensate for its shortcomings.

But with vintage receivers, they were built to be repaired and used indefinitely, so capacitor replacement is easy enough.

The guys at Eton Richer, as always, were excellent in helping us choosing the product. My son is really pleased with the sound and enjoying a variety of different albums. Plays directly through my Bose mini speaker or the aux input on my system amp. Excellent sound from the cartridge. Great value for entry level deck, looks neat, sounds great, look no further! Bought this a few weeks and am very happy with it. It’s really brought my vinyl alive-good definition across the frequency range and the bass is crisp and well articulated.

5 Powered Speakers for Audio Technica AT-LP60 and AT-LP120 Turntables

Compared to most receivers in this price range is has a high number of legacy inputs. Dual component video inputs and four composite inputs are available though they do not get upconverted to HDMI. A good choice by Yamaha is to only support 5 speakers instead of the 7, 9, or even 11 that show up on other models. Few people use more than 5 speakers in their system. Supporting more usually results in lower quality performance at the same price as the quality of parts diminishes.

Both caps are usually the same value, though this is not always the case.

I do not believe the turntable has a built-in preamp and the receiver does not have a phono connection. I plan on purchasing a new turntable but would like to use the components I presently own until I’m ready to make that purchase. The head shell is fixed to the tone arm but it does look like the cartridge can be removed by loosening two screws.

Does anyone know for sure if the cartridge can be replaced? Discussion is locked Permalink You are posting a reply to: Advice for connecting a turntable to AV receiver The posting of advertisements, profanity, or personal attacks is prohibited. All submitted content is subject to our Terms of Use. Track this discussion and email me when there are updates If you’re asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.

Also please exercise your best judgment when posting in the forums–revealing personal information such as your e-mail address, telephone number, and address is not recommended. Preview post Cancel post You are reporting the following post: Advice for connecting a turntable to AV receiver This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET’s great community.

Sorry, there was a problem flagging this post.

AT-LP60-USB

Setting up your turntable is simple, but there are many ways to do it. Before diving in, you should make sure you are familiar with some basic terminology and setup types. What is a phono preamp and why should I care? A phono preamp is a crucial component in any turntable setup. If you have an amp or receiver with a clearly labeled phono input, then you are all set — this means that your amp already has a phono preamp in it.

If not, you will need a phono preamp — available either as a standalone component or built-in to the turntable itself this option is available on all Orbit models.

Press the “record” button in your software before starting the LP.

The Logitech Z has a clear sound with rich bass. It has headphone and line connections. On the back of the subwoofer, there is a knob that lets you control the bass volume. The Logitech Z has many positive reviews and ratings. Some consumers recommend using the RCA inputs as the 3. It costs a little bit more, though. You can connect your turntable to the RCA inputs. You can play music from your computer. This set of speakers work as an audio interface. This is very helpful if your turntable does not have USB connection.

These speakers have a headphone jack and a bass boost switch.

How to Properly Setup Your Turntable